Table of Contents
Advertisement
S
M
I
32: EAI
Function: Enables/Disables the Emergency Automatic ID (EAI) feature.
Available Values: ON / OFF
Default: OFF
S
M
I
33: EAI TIME
Function: Sets the Emergency Automatic ID (EAI) operating mode and its transmit time.
Available Values: INT 1min ~ INT 9min / INT10min / INT15min / INT20min /
INT30min / INT40min / INT50min / CON 1min ~ CON 9min / CON10min /
CON15min / CON20min / CON30min / CON40min / CON50min
Default: CON 5min
INT: Interval Mode
CON: Continuous Mode
S
M
I
34: EMERGENCY SELECT
Function: Select the alarms utilized when the Emergency function is engaged.
Available Values: BEEP / STROBE / BEEP&STROBE / BEAM / BEEP&BEAM / CW /
BEEP&CW / CW-ID TX
Default: BEEP & STROBE
BEEP:
STROBE:
BEEP&STROBE: Loud "Alarm" sounds along with flashing of the white LED light.
BEAM:
BEEP&BEAM:
CW:
BEEP&CW:
CW-ID TX:
: The internationally-recognized Morse Code "S.O.S" message ( • • •
programmed at the factory for the Emergency message.
Here's how to program the Emergency Message:
1. Press the
2. Press and hold the
sage, if desired.
VX-8DR/DE O
S
M
Loud "Alarm" sounds.
Flashes the white LED light.
The white LED light glows continuously.
Loud "Alarm" sounds and the white LED light glows continuously.
The white LED light flashes according to the programmed Emer-
gency message (Morse Code) at a rate of five words per minute.
Sounds tones via the speaker, and flashes the white LED light, ac-
cording to the programmed Emergency message (Morse Code) at a
rate of five words per minute.
Transmits the programmed Emergency message (Morse Code) and
flashes the white LED light, according to the programmed Emergency
message (Morse Code) on the air beginning one minute after activa-
tion of the Emergency function.
key to display any previously-stored emergency message.
key for two seconds to clear any previous emergency mes-
M
S
D
S
M
ET
ODE
• • • ) is
147
Advertisement
Table of Contents
