Table of Contents
Advertisement
FRG "F
16. When you have stored an access code that is less than 8 digits, press the
twice to confirm the code and enable storing the access code; otherwise, just enter the
8 digits and press the
17. Repeat steps 4 through 16 to store other access codes, if so desired.
18. Press the PTT switch to save the settings and exit to normal operation.
O
A
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 44:
INTERNET MODE.
3. Press the
Mode Item.
4. Rotate the DIAL knob to set this Set Mode Item to "FRG"
(thus activating the "Other Internet Link System" mode).
5. Press the PTT switch to save the new settings.
6. Press the
tion feature. The " " icon will appear in the lower left of
the display.
7. Rotate the DIAL knob while pressing the
the Internet Memory register number ("1" - "64") corre-
sponding to the Internet link repeater to which you wish to
establish an Internet link, then press the PTT switch briefly
to lock in the selected access number.
8. Once the Internet Connection feature is activated as in step
7 above, you may press the
lected DTMF string (to establish the link to the desired Internet-link node).
9. To return to the WIRES™ SRG mode, repeat steps 1 - 5 above, selecting "SRG" in
step 4.
VX-8DR/DE O
I
NTERNET
key one time.
FRG N
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
key briefly to activate the Internet Connec-
key, while you are transmitting, to send out the se-
M
C
ONNECTION
R
G
key to select
F
EATURE
" M
key
113
Advertisement
Table of Contents
