Set Your Personal Id - Yaesu VX-8DE Operating Manual

50/144/430 mhz triple-band heavy duty sumersible transceiver
Hide thumbs Also See for VX-8DE:
Table of Contents

Advertisement

M
F
ESSAGE
character of the message you wish to store.
Example 1: Rotate the DIAL knob to select any of the 61
available characters.
Example 2: Press the
the nine available characters associated with that key: p
8. Press the
key to move on to the next character, if needed.
9. Repeat steps 7 and 8 above to complete the personal ID (up
to 8 characters). If you make a mistake, press the
to move back to the incorrect character, then re-enter the
correct character.
10. Press and hold in the
may have been previously stored.
11. When the personal ID entry is complete, press the
briefly to save the new setting.
12. If you wish to store another personal ID, repeat steps 3
through 10 above.
13. Press the PTT switch to exit to normal operation.
You may choose your personal ID from the member list as follows.
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 58: MES-
SAGE REGISTER.
3. Press the
Mode Item.
4. Rotate the DIAL knob to select the member box (1 ~ 20)
where your ID is stored.
5. Press the PTT switch briefly to save the new setting and
exit to normal operation.
104
EATURE
P
key repeatedly to toggle among
P
Q
R
S
key for two seconds to delete all data after the cursor that
S
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
M
L
p .....
7
key
key
P
ID
VX-8DR/DE O
q
r
s
M

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vx-8dr

Table of Contents