Table of Contents
Advertisement
S
M
ET
ODE
R
S
Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Sets the magnitude of the Repeater Shift.
CTCSS/DCS/EPCS S
Selects the number of Bell ringer repetitions.
Enables/Disables the Bell ringer function and its sound selection.
Setting of the DCS code.
Enables/Disables the "Inverted" DCS tone.
Enables/Disables the Answer Back function of the Enhanced CTCSS Paging & Code Squelch.
Sets the Receiver Pager Code for the Enhanced CTCSS Paging & Code Squelch.
Sets the Transmitting Pager Code for the Enhanced CTCSS Paging & Code Squelch.
Program the CTCSS Tone Frequency for the User Programmed Reverse CTCSS Decoder.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency
Enables/Disables the receiver audio output while the Tone Search Scanner is activated.
Selects the Tone Search Scanner speed.
ARTS
S
Select the Beep option during ARTS operation.
Select the Polling Interval during ARTS operation.
Program and activate the CW Identifier (used during ARTS operation).
M
S
Enables/Disables the Memory Bank Link Scan.
Stores Alpha-Numeric "Tag" for the Memory Bank.
Selects the channel step for the fast channel selection mode while in the Memory Recall mode.
Stores "Alpha-Numeric" tags for the Memory channels.
Enables/Disables the Memory Write Protector.
Determines the method of selecting channels for Memory Storage.
S
S
Selects the Memory Scan channel-selection mode.
Enables/Disables the Scan Lamp (while scanner is paused).
Selects the Scan Re-start Delay time.
Selects the Receive-mode Battery Saver interval ("sleep" ratio).
Enables/Disables the Priority Revert feature.
Selects the time between the Priority (Dual Watch) channel checks, when the feature is active.
B
S
S
Setting of the Automatic Power-Off time.
Enables/Disables the BUSY LED while the squelch is open.
Selects the Receive-mode Battery Saver interval ("sleep" ratio).
Enables/Disables the Transmitter Battery Saver.
M
S
Programming a Member List for the Message feature.
Selects your Personal ID for the Message feature.
Programming a Message for the Message feature.
WIRES
S
Enables/Disables the DTMF Autodialer feature while using the Internet Connection feature (WIRES ).
Enables/Disables the Internet Connection feature (WIRES ).
Selects the Access Number (DTMF digit) for SRG operation of the Internet Connection feature (WIRES ).
Selects the primary function of the [ INTERNET ] key.
Selects the operating mode of the Internet Connection feature (WIRES ).
Programming of the Access Number (DTMF code) for the FRG station of the WIRES (or non WIRES
Internet Link System) access.
EAI S
Enables/Disables the Emergency Automatic ID (EAI) feature.
Sets the Emergency Automatic ID (EAI) operating mode and its transmit time.
Select the alarms utilized when the Emergency function is engaged.
®
S
Pairing the Bluetooth
®
unit and setting the Pin Code.
Select the operating mode of the optional BH-1A/BH-2A Bluetooth
140
S
74:
75:
76:
S
14:
15:
26:
27:
66:
67:
68:
70:
94:
95:
99:
100:
101:
S
21:
S
52:
53:
54:
56:
S
55:
81:
82:
83:
71:
72:
S
18:
79:
80:
S
57:
58:
59:
S
40:
41:
42:
43:
44:
45:
S
32:
33:
34:
S
16:
®
Headset.
17:
VX-8DR/DE O
M
I
A
RPT ARS
ON / OFF
RPT SHIFT
SIMPLEX / -RPT / +RPT
RPT SHIFT FREQ
0.000MHz ~ 150.000MHz (50 kHz/step)
M
I
A
BELL RINGER
1time - 20times / CONTINUOUS
BELL SELECT
OFF / BELL / USER BP1 / USER BP2 /
USER BP3
DCS CODE
104 standard DCS codes (DCS 023)
DCS INVERSION
RX-NORMAL, TX-NORMAL /
RX-INVERT, TX-NORMAL /
RX-BOTH, TX-NORMAL /
RX-NORMAL, TX-INVERT /
RX-INVERT, TX-INVERT / RX-BOTH, TX-INVERT
PAGER ANS-BACK
ON / OFF
PAGER CODE-RX
--
PAGER CODE-TX
--
PR FREQUENCY
300 Hz ~ 3000 Hz (1000 Hz/step) (1600 Hz)
SQL SPLIT
OFF / ON
SQL TYPE
OFF / TONE / TONE SQL / DCS / REV TONE /
PR FREQ / PAGER / MESSAGE
TONE FREQUENCY
50 standard CTCSS tones (100.0Hz)
TONE-SRCH MUTE
ON / OFF
TONE-SRCH SPEED
FAST (2.5 tone/sec) / SLOW (1.25 tone/sec)
M
I
A
5:
ARTS BEEP
IN RANGE / ALWAYS / OFF
6:
ARTS INTERVAL
15sec / 25sec
CW ID
--
M
I
A
7:
BANK LINK
--
8:
BANK NAME
--
MEMORY FAST STEP
10CH / 20CH / 50CH / 100CH
MEMORY NAME
--
MEMORY PROTECT
ON / OFF
MEMORY WRITE
NEXT / LOWER
M
I
A
MEMORY SKIP
OFF / SKIP / ONLY
SCAN LAMP
ON / OFF
SCAN RE-START
0.1sec ~ 0.9sec (0.1sec/step) or
1.0sec ~ 10.0sec (0.5sec/step) (5.0sec)
SCAN RESUME
2.0sec ~ 10.0sec (0.5sec/step) /
BUSY / HOLD (5.0sec)
PRI REVERT
ON / OFF
PRI TIME
0.1sec ~ 0.9sec (0.1sec/step) or
1.0sec ~ 10.0sec (0.5sec/step) (5.0sec)
M
I
A
4:
APO
0.5hour - 12.0hour / OFF
BUSY LED
ON / OFF
SAVE RX
0.2sec ~ 0.9sec (0.1sec/step),
1.0sec ~ 9.5sec (0.5sec/step), or
10.0sec ~ 60.0sec (5sec/step)
SAVE TX
ON / OFF
M
I
A
MESSAGE LIST
--
MESSAGE REGISTER
--
MESSAGE SELECT
--
M
I
A
INT MANUAL/AUTO
MANUAL / AUTO
INTERNET
ON / OFF
INTERNET CODE
DTMF 0 ~ DTMF 9, DTMF A ~ DTMF D, DTMF ,
or DTMF # (DTMF 1)
INTERNET KEY
INTERNET / INT SELECT / SET MODE
INTERNET MODE
FRG / SRG
INTERNET SELECT
--
M
I
A
EAI
ON / OFF
EAI TIME
INT 1min ~ INT 9min, INT10min, INT15min,
INT20min, INT30min, INT40min, INT50min,
CON 1min ~ CON 9min, CON10min, CON15min,
CON20min, CON30min, CON40min, CON50min,
(CON 5min)
EMERGENCY SELECT
BEEP / STROBE / BEEP & STROBE / BEAM /
BEEP & BEAM / CW / BEEP & CW / CW-ID TX
M
I
A
BLUETOOTH P-CODE
0000 - 9999 (6111)
BLUETOOTH SET
VOX: PTT / VOX HIGH / VOX LOW,
MODE: MONO / STEREO,
SAVE: ON / OFF
V
D
: B
I
V
D
: B
I
V
D
: B
I
V
D
: B
I
V
D
: B
I
V
D
: B
I
V
D
: B
I
V
D
: B
I
V
D
: B
I
V
D
: B
I
M
Advertisement
Table of Contents
