Table of Contents
Advertisement
S
M
I
6: ARTS INTERVAL
Function: Select the Polling Interval during ARTS operation.
Available Values: 15sec / 25sec
Default: 25sec
This setting determines how often the other station will be polled during ARTS operation.
S
M
I
7: BANK LINK
Function: Enables/Disables the Memory Bank Link Scan. See page 67 for details.
S
M
I
8: BANK NAME
Function: Stores Alpha-Numeric "Tag" for the Memory Bank. See page 50 for details.
S
M
I
9: BCLO
Function: Enables/Disables the Busy Channel Lock-Out feature.
Available Values: ON / OFF
Default: OFF
S
M
I
10: BEEP EDGE
Function: Enables/Disables the Band-edge beeper while selecting the frequency by the
DIAL knob.
Available Values: ON / OFF
Default: OFF
Note: When this Set Mode Item is set to "ON", a beep will sound when the frequency
reaches the band edge while selecting the VFO frequency with the DIAL knob.
S
M
I
11: BEEP LEVEL
Function: Adjust the Beep volume level.
Available Values: LEVEL 1 ~ LEVEL 9
Default: LEVEL 5
S
M
I
12: BEEP MELODY
Function: Create the Beep Melody for Bell ringer function. See page 43 for details.
S
M
I
13: BEEP SELECT
Function: Enables/Disables the keypad beeper.
Available Values: KEY & SCAN / KEY / OFF
Default: KEY & SCAN
KEY & SCAN: The beeper sounds when you press a key or when the scanner stops.
KEY:
The beeper sounds when you press a key.
OFF:
The beeper is disabled.
VX-8DR/DE O
S
M
S
M
S
ET
D
M
ODE
143
Advertisement
Table of Contents
