Programming The User Key Assignment - Yaesu FTA-310 Operating Manual

p
rogrammIng tHe
Default FTA-310 functions have been assigned to "Pri-
mary" (press) and "Third" (press and hold in) function
of the front panel's [ USER ] key at the factory. These
may be changed by the user, if you wish to utilize an-
other function on this key.
To program the function assigned to the [ USER ] key:
 Press the [ F ] key, then press downward on the VOL-
UME knob to activate the Menu ("SET") mode.
 Rotate the DIAL knob to select the Menu Item to be
configured #18 "KEY1" which is tied to the primary
function, or #19 "KEY2" which is tied to the third
function.
FTA-310 O
perATing
user K
M
AnuAl
a
ey ssIgnments
 Press downward on the VOLUME knob momentari-
ly, then rotate the DIAL knob to select the function
you wish to assign to the [ USER ] key.
 When you have made your selection, press down-
ward on the VOLUME knob to save the new setting,
then press the PTT switch to exit the Menu ("SET")
mode.
The available selections include: no/ANL/PA/EQ
ANL: Receiver Automatic Noise Limiter (on)
PA: Public Address Mode (see page 26)
PIT: Pitch Control (see page 24)
no: Disables the key
43