Table of Contents
Advertisement
M
G
The Message Group option allows you to choose to receive only specific types of message
information.
1. Press the
key several times until the APRS MESSAGE
screen appears on the display.
2. Press and hold the
GPS Set Mode.
3. Rotate the DIAL knob to select Set Mode Item 19: MSG
GROUP.
4. Press the
Mode Item.
5. Press the
/
utilize (G1 ALL
QST
Note: " " is a wild card indicating any received character
will be accepted in that slot.
6. If you add a new message group code and/or bulletin group code, select "G5" (for
message group code) or "B1" ~ "B3" (for bulletin group code) by rotating the DIAL
knob, then press the
and
7. Use the
select the desired characters/numbers in each column. Repeat for each column to
complete the message (up to 9 characters) or bulletin (up to 5 characters).
8. When you have completed your selection, press the PTT switch to save the new
setting and exit to the APRS MESSAGE screen.
VX-8DR/DE O
R
S
key for one second to enter the APRS/
key briefly to enable adjustment of this Set
key to select the "Group" you wish to
, G2 CQ
, or G4 YAESU
key.
keys to navigate to each column, then use the DIAL knob to
M
APRS
APRS M
, G3
).
®
O
PERATION
89
Advertisement
Table of Contents
