Table of Contents
Advertisement
S
M
ET
ODE
3. Rotate the DIAL knob, or press one of the keyboard keys, to select the first letter/
number of the message.
Example 1: Rotate the DIAL knob to select any of the 39 available characters.
Example 2: Press the
ters associated with that key: A
4. Press the
5. Repeat previous steps 3 and 4 to complete the message (up to 16 characters).
6. If you make a mistake, press the
correct letter/number.
7. Press and hold the
have been previously stored erroneously.
8. When you have entered the message, press the
sage, then press the PTT switch to save the settings and exit to normal operation.
S
M
I
35: EXTENDED MENU
Function: Enables/Disables the extended Set Mode Menu.
Available Values: ON / OFF
Default: OFF
S
M
I
36: FW KEY HOLD TIME
Function: Set the duration time that the
function.
Available Values: FW0.3sec / FW0.5sec / FW0.7sec / FW1.0sec / FW1.5sec
Default: FW0.5sec
S
M
I
37: HALF DEVIATION
Function: Reducing the Deviation level by 50 %.
Available Values: ON/OFF
Default: OFF
S
M
I
38: HOME VFO
Function: Enables/Disables the function of the VFO DIAL knob, while in the Home Chan-
nel mode.
Available Values: DISABLE / ENABLE
Default: ENABLE
148
S
M
key repeatedly to toggle among the four available charac-
key to move to the next character, if needed.
key for two seconds to delete all data after the cursor that may
S
D
B
key to backspace the cursor; now re-enter the
key must be held to activate the secondary
VX-8DR/DE O
C
2
key again to confirm the mes-
M
Advertisement
Table of Contents
