Table of Contents
Advertisement
S
CANNING
P
This feature allows you to set sub-band limits for either scanning or manual VFO opera-
tion. For example, you might wish to set up a limit (in North America) of 144.300 MHz to
148.000 MHz to prevent encroachment into the SSB/CW "Weak Signal" portion of the
band below 144.300 MHz. Here's how to do this:
1. Set the radio to the VFO mode by pressing the
2. Using the techniques learned earlier, store (per the above concept) 144.300 MHz into
Memory Channel #L1 (the "L" designates the Lower sub-band limit).
3. Likewise, store 146.000 MHz into Memory Channel #U1 (the "U" designates the
Upper sub-band limit).
4. Press and hold in the
DIAL knob while holding in the
sired PMS frequency pair (PMSxx).
5. Release the
grammed range. The "VFO" label will be replaced by "PMS"
and the Band number will be replaced by "Pxx". Tuning
and scanning will now be limited within the just-pro-
grammed range.
6. 50 pairs of Band Limit memories, labeled L1/U1 through L50/U50 are available.
You therefore can set upper and lower operation limits on a number of bands, if you
like.
7. To exit to normal operation, press the
68
B
key for one second and rotate the
key to start scanning within the just-pro-
L
M
key, if necessary.
key to select the de-
key.
VX-8DR/DE O
S
PMS
M
Advertisement
Table of Contents
