Table of Contents
Advertisement
S
M
1. Press and hold the
Mode.
2. Rotate the DIAL knob to select Set Mode Item 104: UNIT
SELECT.
3. Press the
Mode Item.
4. Rotate the DIAL knob to select the preferred unit (°C or °F).
5. Press the
rotate the DIAL knob to select the preferred unit (hPa, mb,
mmHg, or inch).
6. Press the
key to change the cursor to "ALTI", then ro-
tate the DIAL knob to select the preferred unit (m or ft).
7. Press the PTT switch briefly to save the new setting and
exit to normal operation.
C
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 103: UNIT
OFFSET.
3. Press the
Mode Item.
4. Rotate the DIAL knob to adjust the VX-8DR display to the
calibrated barometer value.
Note: The offset value appears in an "OFST" row.
5. Press the
key to change the cursor to "ALTI", then ro-
tate the DIAL knob to adjust the VX-8DR display to the
true altitude at your current location.
Note: The offset value appears in an "OFST" row.
6. Press the PTT switch briefly to save the new setting and
exit to normal operation.
The VX-8DR/DE's altimeter calculates from atmospheric pressure. There-
fore, you must perform the Barometric correction first.
VX-8DR/DE O
S
U
key for one second to enter the Set
key briefly to enable adjustment of this Set
key to change the cursor to "BARO", then
S
U
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
M
M
O
S
S
M
ENSOR
U
ODE
121
Advertisement
Table of Contents
