Installation Of Fnb-101Li Battery Pack - Yaesu VX-8DE Operating Manual

50/144/430 mhz triple-band heavy duty sumersible transceiver
Hide thumbs Also See for VX-8DE:
Table of Contents

Advertisement

I
The FNB-101LI is a high-performance Lithium-Ion battery providing high capacity in a
very compact package. Under normal use, the FNB-101LI may be used for approxi-
mately 300 charge cycles, after which operating time may be expected to decrease. An old
battery pack, which is displaying diminished capacity should be replaced with a new one.
To install the FNB-101LI Battery Pack, carefully mate the
battery's three alignment tabs with their corresponding align-
ment slots on the transceiver bottom case, then gently press
the top side of the Battery Pack until it locks in place with a
"click".
To remove the Battery Pack, turn the transceiver off and
remove any protective cases. Press the Battery Pack Release
Knobs downward to unlock the latch, then remove the Bat-
tery Pack from the transceiver.
1) The VX-8DR/DE battery must be correctly in-
stalled, to maintain the waterproof integrity.
2) Always use the FNB-101LI or optional FNB-
102LI Lithium-Ion Battery Pack.
3) Battery Pack shall not be exposed to excessive heat such
as sunshine, fire, or the like.
4) Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions..
If the battery has never been used, or its charge is depleted, it may be charged by connect-
ing the PA-44 Battery Charger, as shown in the illustration, to the EXT DC jack.
In the USA/EXP market, if only 12 ~ 16 Volt DC power is available, the optional E-DC-
5B DC Adapter (with its cigarette lighter plug) or E-DC-6 DC Cable may also be used for
charging the battery, as shown in the illustration.
PA-44
VX-8DR/DE O
I
NSTALLATION OF
FNB-101LI B
E-DC-5B
(USA/EXP market only)
M
A
CCESSORIES
P
I
B
P
R
K
R
E-DC-6
(USA/EXP market only)
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vx-8dr

Table of Contents