Chapter 4 — Troubleshooting and Maintaining the CK3
Clean Booting the CK3
78
To cold boot your CK3
1 Press and hold
2 Remove the battery.
3 Use the stylus to press the reset button in the battery
compartment of the CK3.
Do not use force or a sharp object when pressing the reset
button. You may damage the reset button.
4 Replace the battery.
If the CK3 does not warm boot or cold boot, you may need to perform
a clean boot. When you clean boot the CK3, the CK3 only loads files
and applications that are absolutely required by the operating system.
Perform a clean boot to get the CK3 up and running so that you can
run diagnostic tests to troubleshoot the normal boot process.
The clean boot process erases the CK3 memory, including all
applications and data files in the object store. To preserve
applications through a clean boot, store them in the Flash File
Store. For more information, see
CK3" on page
55.
for about 2 seconds to suspend the CK3.
"Installing Applications on the
CK3 Mobile Computer User's Manual
Reset button