Table of Contents
Advertisement
Powering On
Within the HS-1000 set up the HDR-200 is supplied with power from the PD-1 Power Distribution unit on the
rear of the HS-1000. Please ensure the PD-1 is supplied with power and switched on before attempting to
power on the HDR-200.
The LCD display panel should show HDR-200 and after a few seconds the track display should appear and
then the HDR-200 is ready to be operated.
Menu Options
The HDR-200 is a menu driven unit; there are 19 menus which are used to initially set up the unit. The menu
settings are non-volatile (they are stored even when the unit is switched off). So many of the settings, such
as date and time, you will only need to set once. We will look at each individual menu in more detail, but here
is a quick overview of them. N.B. Not all menus appear when the Video Input Button is illuminated.
The 19 Menus are:
Press the Power Button until it lights up
HDD MODE
This mode allows the HDR-200 to connect to a computer for drag and
drop file transfers via IEEE-1394 cabling to a PC or MAC.
See HDD Mode Menu for more details.
SETUP LOOP PLAY
The HDR-200 will continuously loop play the selected track until
stopped.
FREE SPACE
Displays how much free space is available on the current HDR-200
removable drive.
TOTAL SPACE
Displays the total space or capacity of the current HDR-200
removable drive.
VIDEO INPUT SOURCE
The HDR-200 has two types of Analogue Input, YPbPr or SDI can be
set.
See Video Input Source Menu for more details.
AUDIO INPUT SOURCE
The HDR-200 has two types Audio Input can be set.
- ANALOG AUDIO relates to an XLR audio input source, this audio will
be embedded into the SDI output.
- SDI EMBEDDED AUDIO relates to an SDI input, this audio will also
be embedded into the SDI output.
SET MPEG2 BIT RATE
The HDR-200 has 9 Bit Rate modes
Bit rates of 20, 25, 30, 35, 40, 45, 50, 55, or 60 Mbps can be set.
See SET MPEG2 BIT RATE Menu for more details.
SET I-FRAME ONLY
Set the HDR-200 to encode Intra frame only.
8
Advertisement
Table of Contents
