Video Input Source Menu
The Video Input Source Menu sets the analogue input mode of the HDR-200.
The HDR-200 has YPbPr and SDI analogue inputs.
To select the Video Input Source:
Press the Menu Button, to enter menu mode
Press the FWD (►►) Button to navigate the menus until VIDEO INPUT SOURCE is displayed.
Press the Next (▲) Button(right) to enter the VIDEO INPUT SOURCE set up menu.
Press the FWD (►►) Button to select either SDI or YPbPr.
To confirm your selection and exit the menu press the Next (▲) Button(right).
Then press the Menu Button to leave menu mode.
11