Table of Contents
Advertisement
Rear Overview
Please refer to the individual instruction manual of each item for further details.
Bare Bones MS-900 rear panel shown - your configuration will be different depending on your order.
RP- 31:
Patch panel for the ITC-100 to
make connection with belt
pack ITC-100SL via XLR cable
PD-1:
Power Distribution, power
supply to all the integrated
devices inside MS-900
SE-900 Rear Panel:
SE-900 rear panel, for video,
audio and control connections
Powering On
Each product built into the MS-900 receives DC power from the PD-1 unit on the rear of the MS-900. Please
ensure the PD-1 is fed with either an AC or DC feed before attempting to switch on the MS-900. For more
information on the PD-1 please refer to its manual. If a product within the MS-900 fails to start after the PD-1
is switched on please locate the on/off switch for the product that has not yet started. For further advice on
using a product within the MS-900 please refer to its manual.
Powering Off
Before powering off the MS-900 via the PD-1 on/off switch please ensure the DN-500 has been stopped.
Packing Away
Once the external source and camera cabling have been removed from the rear connection plates replace
the rear case cover. Return the ITC-100 gooseneck mic, any ITC-100 cabling, tally lights and headsets etc to
your accessory kit bag/box. Carefully lower the 17" TLM-170D monitor and slide it back into its shipping
position remembering to secure the silver screws so it cannot move when in transit. Now lift the SE-900
Control Panel Keyboard and secure in its shipping position with the chained securing bolts. Now secure the
front cover and the MS-900 is ready to be moved.
Specifications
Please refer to individual instruction manuals for specifications of each product built into the MS-900.
Case Dimensions:
The MS-900 is heavy – approximately 70Kg – Do not attempt to lift or move it on your own.
Depth: 72 cm
Width: 60 cm
Height: 49 cm
9
Advertisement
Table of Contents
