Set Date & Time Menu; Format Hard Disk Menu - Datavideo HDR-200 User Manual

Set Date & Time Menu
To set the Date & Time on the HDR-200
Press the Menu Button, to enter menu mode
Press the REW (◄◄) Button to navigate the menus until SET DATE & TIME is displayed
Press the Next (▲) Button(right) to enter the SET Date & Time menu
You will see a flashing cursor on the date value.
To set the date use the Play/Pause Button to increase the value or the Stop Button to decrease the value
Increases Value
Use the FWD (►►) Button to move the cursor to the next column to the right i.e. Month / Year / Hours /
Minutes or the REW (◄◄) Button to move the cursor back to the left.
Moves the cursor to the right
Once you have set the date & time press the Next (▲) Button(right) to exit the menu
Then press the Menu Button to leave menu mode

Format Hard Disk Menu

Format Hard Disk will remove all tracks from the hard drive.
Press the Menu Button, to enter menu mode
Press the REW (◄◄) Button to navigate the menus until FORMAT HARD DISK is displayed
Press the Next (▲) Button(right) to enter the FORMAT HARD DISK menu
You will see ARE YOU SURE? displayed
Press the Next (▲) Button(right)again to confirm that you want to format the hard disk.
Decreases Value
Moves the cursor to the left
15