Set Mpeg2 Bit Rate Menu - Datavideo HDR-200 User Manual

SET MPEG2 BIT RATE Menu

To select the MPEG2 encoding BIT RATE:
Press the Menu Button, to enter the menu mode
Press the FWD (►►) Button to navigate the menus until SET MPEG2 BIT RATE is displayed
Press the Next (▲) Button(right) to enter the SET MPEG2 BIT RATE menu
Use the FWD(►►) or REW(◄◄) Button to select the desire bit rates (20,25,30,35,40,45,50,55,60 Mbps)
To confirm your selection and exit the menu press the Next (▲) Button(right).
Then press the Menu Button to leave menu mode
For example, the table of 120 GB HDD is the reference of Bit Rate mode selection.
HDD Type
120GB
120GB
120GB
Bit Rate Mode Maximum Recordable Time
20 Mbps
40 Mbps
60 Mbps
810 minutes 760
405 minutes 390
270 minutes 260
12