Erase Track Menu; Set Output Channel Menu - Datavideo HDR-200 User Manual

After a few seconds the HDR-200 will reboot and the display will return to normal

Erase Track Menu

Erase Track is used for deleting individual tracks from the HDR-200.
Press the Menu Button, to enter menu mode
Press the REW (◄◄) Button to navigate the menus until ERASE TRACK is displayed
Press the Next (▲) Button(right) to enter the ERASE TRACK menu
Use the FWD (►►) or REW (◄◄) Button to select the track that you want to erase - (Track 01 in this case)
Press the Next (▲) Button(right) to erase the selected track - The track duration will return to 00:00:00:00
Then press the Menu Button to leave menu mode

Set Output Channel Menu

It is not a frequent occurrence but when it happens it is possible to change the Output Channel I.D of the
HDR-200 to overcome the conflict. For example if another device has the same output channel I.D. as the
HDR-200 this will result in a conflict, which will mean that the HDR-200 output is blocked. Please change the
output channel I.D. of the HDR-200 to solve the problem.
The default output channel of the HDR-200 is 1, selecting any other value, between 0 - 63 will overcome the
conflict.
Press the Menu Button, to enter menu mode
Press the REW (◄◄) Button to navigate the menus until SET OUTPUT CHANNEL is displayed
Press the Next (▲) Button(right) to enter the SET OUTPUT CHANNEL menu
Use FWD (►►) or REW (◄◄) to change the output channel number - in this case we have selected 1
16