Datavideo HDR-200 User Manual page 10

SET 1080i H-RES.
To select the encoding horizontal resolution
- Select 1920 and the record format is 1920x1080i.
- Select 1440 and the record format is 1440x1080i.
See SET 1080i H-RES. Menu for more details.
SET GPI TRIGGER MODE
The HDR-200 has two GPI trigger modes, Pulse or Level trigger can
be set.
See GPI Mode & Function Menus for more details.
SELECT GPI FUNCTION
The GPI function can be set to either Play / Play Pause or Record /
Record Pause.
See GPI Mode & Function Menus for more details.
SET DATE & TIME
Sets the date and time on the HDR-200; the setting is non-volatile so it
is stored even when the unit is powered off.
See Set Date & Time Menu for more details.
FORMAT HARD DISK
Formats the HDD and erases all files and tracks from the HDR-200.
See Format Hard Disk Menu for more details.
ERASE TRACK
Erases the selected track from the HDR-200.
See Erase Track Menu for more details.
SET OUTPUT CHANNEL
Allows the output channel of the HDR-200 to be switched to a different
I.D. number.
See Set Output Channel Menu for more details.
HDD SURFACE SCAN
Checks the HDD for errors / bad sectors. This is only necessary if your
HDR-200 is not performing correctly, or if you install a new HDD. A
result.txt file is created in the root directory of the HDD, this can be
viewed from a PC.
HDD MODE CABLE LEN.
The HDR-200 has two types of cable mode that can be set when
connecting the HDR-200 to either a PC or MAC.
- If your IEEE 1394 cable length≦20 M, please select cable mode:
LONG DISTANCE CABLE.
- If your IEEE 1394 cable length≦1.8 M, please select cable mode:
SHORT DISTANCE CABLE.
D-SUB H/W INTERFACE
The 9 pin D-SUB can be set to either RS-422 (differential) or RS-232
(single end) transmission mode
- Select RS-232 mode, you can control HDR-200 RS-232 from PC.
- Select RS-422 mode, you can control HDR-200 via RS-422 from
external devices.
FP FIRMWARE UPDATE
To upgrade the front panel firmware.
FIRMWARE VERSION
Display the Revision Number and Firmware Version of the HDR-200
9