How to install a 2.5" SATA HDD into the removable HE-1 HDD Enclosure
1. Remove the two screws from the 2.5" HE-1 front cover then slide out the PCB.
2. Slide the drive into the PCB and secure with the supplied screws.
3. Slide the PCB and drive module back into the HE-1 enclosure.
4. Re-assemble the HE-1 with the two screws to secure the front cover.
5. Slide HE-1 with drive fitted into HDR-200 then move locking button to the left.
5