Connecting To A Mac - Datavideo HDR-200 User Manual

Connecting to a MAC

NB: Although a MAC may see the HDR-200 as an AVC compliant DV Device it is not intended to be
operated as such.
Connect the HDR-200 IEEE-1394 output to a MAC.
To set the HDR-200 into HDD Mode firstly press the Menu button so that it is illuminated.
You will see the display change to the HDD Mode Menu
Press the Next (▲) Button(right) to select ENTER and the display will show the HDD Enable Confirmation
Screen
Press the Next (▲) Button(right) again to confirm, after a few seconds HDD Mode will be enabled
The MAC should see the HDR-200 as a HDD and the files will appear in the root directory of the drive.
You can select the required files and drag and drop them to the required destination.
To un-mount the HDR-200 from your MAC either "Eject" the drive, or drag it to the Trash Can. Once the
HDR-200 is un-mounted from the MAC the LCD display will return to normal.
22