Powering On; Powering Off; Packing Away - Datavideo GO KMU-100 STUDIO Instruction Manual

Powering On

Each product built into the GO KMU-100 Studio receives DC power from the power connection on
the rear of the RMK-6 unit of the GO KMU-100 Studio.
Please ensure the RMK-6 is fed with a DC power supply before attempting to switch on the GO KMU-
100 Studio.
If a product within the GO KMU-100 Studio fails to start after the power switch on the rear of the
RMK-6 is switched on please locate the on/off switch for that product which has not yet started.。
For further advice on using a product within the GO KMU-100 Studio please refer to the related
manual.

Powering Off

Before powering off the GO KMU-100 Studio via the power switch on the rear of the RMK-6 please
ensure that the NVS-25 has been stopped.

Packing Away

Carefully fold the 10.1" TLM-102 monitor to its horizontal 1U shipping position. Please remember
to secure its position so it cannot move when in transit.
Now return the GO KMU-100 Studio to the HC-800 case and the product is ready to be moved.
12