Connections & Controls - Datavideo HDR-200 User Manual

Connections & Controls
Front Panel
Power On / Off Button. This is a soft power on / off button which
powers the unit on from a state of standby; the main power on / off
switch is on the rear panel.
Display Panel. Displays the status of the HDR-200. The display will
show Track Number, timecode, or if the Menu Button is pressed the
Menu Display.
Menu Button. This calls up the menu display which is navigated using
the Fwd / Rew Buttons and Previous / Next Buttons
Fwd / Rew Buttons. In playback mode these buttons will operate as
Fast Forward and Rewind Buttons. If the Menu Button is pressed these
buttons will navigate backwards and forwards between the various
menu options.
Video Input Button. Switches the HDR-200 to Video Input (Component
YUV / S-Video Y/C / Composite CVBS) - Video Inputs can only be
recorded in DV formats. See Operation with an analogue video
source for more details.
Previous / Next Buttons. These buttons navigate up and down
between recorded tracks and menu options.
Record Button. Puts the HDR-200 into Record Mode. To start
recording press the Record Button and Play Button simultaneously.
N.B. Unit will not record if no video signal is present.
Play / Pause Button. Starts playback of a track, or pauses playback of
a track- status will be displayed on the Display Panel. Also Starts /
Pauses a recording when unit is in Record mode.
Stop Button. Stops playback or record.
The Audio Input Level LEDs show the audio input levels from the
incoming source.
The Audio Level Adjustments allow you to adjust the headphone
volume.
Accepts a stereo mini jack plug for stereo headphone. The headphone
volume is controlled by the Audio Level Adjustments.
6 Pin DV In/Out Port. This is a convenient front mounted DV / IEEE-
1394 Port for connection to a DV / HDV camcorder, or to a PC for file
transfer.
2.5" Removable HDD Rack, SATA & USB interface connecting to a PC
for file transfer.
6