Reset - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Bootloader Commands

reset

Use the reset bootloader command to perform a hard reset on the system. A hard reset is similar to

power-cycling the switch, clearing the processor, registers, and memory.

Syntax Description

This command has no arguments or keywords.

Command Modes

Command History

This example shows how to reset the system:

switch: reset

Are you sure you want to reset the system (y/n)?y

System resetting...

Related Commands

Modification

This command was introduced.

Loads and boots up an executable image and enters the command-line

Catalyst 2960 Switch Command Reference

Show Quick Links

Table of Contents