Cisco Catalyst 2960 Command Reference Manual page 490

show vlan
Command History Release
12.2(25)FX
Usage Guidelines In the show vlan mtu command output, the MTU_Mismatch column shows whether all the ports in the
VLAN have the same MTU. When yes appears in this column, it means that the VLAN has ports with
different MTUs, and packets that are switched from a port with a larger MTU to a port with a smaller
MTU might be dropped. If the VLAN does not have an SVI, the hyphen (-) symbol appears in the
SVI_MTU column. If the MTU-Mismatch column displays yes, the names of the port with the MinMTU
and the port with the MaxMTU appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show vlan command.
display.
Switch> show vlan
VLAN Name
---- -------------------------------- --------- -------------------------------
1
<output truncated>
2
3
<output truncated>
1000 VLAN1000
1002 fddi-default
1003 token-ring-default
1004 fddinet-default
1005 trnet-default
VLAN Type
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1
2
3
<output truncated>
1005 trnet 101005
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type
------ --------- ----------------- ------------------------------------------
Catalyst 2960 Switch Command Reference
2-566
Modification
This command was introduced.
default
VLAN0002
VLAN0003
SAID MTU
enet 100001 1500
enet 100002 1500
enet 100003 1500
1500
Status Ports
active Gi0/1, Gi0/2, Gi0/3, Gi0/4
Gi0/5, Gi0/6, Gi0/7, Gi0/8
Gi0/9, Gi0/10, Gi0/11, Gi0/12
Gi0/13, Gi0/14, Gi0/15, Gi0/16
active
active
active
active
active
active
active
Parent RingNo BridgeNo Stp
- - -
- - -
- - -
- - -
Ports
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
Table 2-30 describes the fields in the
BrdgMode Trans1 Trans2
- - 1002 1003
- - 0 0
- - 0 0
ibm - 0 0
OL-8604-03