Cisco Catalyst 2960 Command Reference Manual page 78

cluster commander-address
Examples This is partial sample output from the running configuration of a cluster member.
Switch(config)# show running-configuration
<output truncated>
cluster commander-address 00e0.9bc0.a500 member 4 name my_cluster
<output truncated>
This example shows how to remove a member from the cluster by using the cluster member console.
Switch # configure terminal
Enter configuration commands, one per line.
Switch(config)# no cluster commander-address
You can verify your settings by entering the show cluster privileged EXEC command.
Related Commands Command
debug cluster
Catalyst 2960 Switch Command Reference
2-52
End with CNTL/Z.
Description
Displays the cluster status and a summary of the cluster to which the switch
belongs.
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
OL-8604-03