Debug Pagp - Cisco Catalyst 2960 Command Reference Manual

debug pagp

debug pagp
Use the debug pagp privileged EXEC command to enable debugging of Port Aggregation Protocol
(PAgP) activity. Use the no form of this command to disable debugging.
Syntax Description all
event
fsm
misc
packet
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines The undebug pagp command is the same as the no debug pagp command.
Related Commands Command
show debugging
show pagp
Catalyst 2960 Switch Command Reference
B-28
debug pagp [all | event | fsm | misc | packet]
no debug pagp [all | event | fsm | misc | packet]
(Optional) Display all PAgP debug messages.
(Optional) Display PAgP event debug messages.
(Optional) Display PAgP finite state-machine debug messages.
(Optional) Display miscellaneous PAgP debug messages.
(Optional) Display PAgP packet debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays PAgP channel-group information.
Appendix B Catalyst 2960 Switch Debug Commands
OL-8604-03