Cisco Catalyst 2960 Command Reference Manual page 462

show pagp
This is an example of output from the show pagp 1 internal command:
Switch> show pagp 1 internal
Flags:
Timers: H - Hello timer is running.
Channel group 1
Port
Gi0/1
Gi0/2
This is an example of output from the show pagp 1 neighbor command:
Switch> show pagp 1 neighbor
Related Commands Command
clear pagp
Catalyst 2960 Switch Command Reference
2-538
S - Device is sending Slow hello.
A - Device is in Auto mode.
S - Switching timer is running.
Flags State Timers
SC U6/S7 H
SC U6/S7 H
Flags: S - Device is sending Slow hello.
A - Device is in Auto mode.
Channel group 1 neighbors
Partner
Port Name
Gi0/1 switch-p2
Gi0/2 switch-p2
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
C - Device is in Consistent state.
Q - Quit timer is running.
I - Interface timer is running.
Hello Partner PAgP
Interval Count Priority
30s 1 128
30s 1 128
C - Device is in Consistent state.
P - Device learns on physical port.
Partner
Device ID
0002.4b29.4600
0002.4b29.4600
Description
Clears PAgP channel-group information.
Learning Group
Method Ifindex
Any 16
Any 16
Partner Partner Group
Port Age Flags
Gi0/1 9s SC
Gi0/2 24s SC
Cap.
10001
10001
OL-8604-03