Cisco Catalyst 2960 Command Reference Manual page 115

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Catalyst 2960 Switch Cisco IOS Commands

This example shows how to enable MAC authentication bypass and to configure the switch to use EAP

for authentication:

Switch(config-if)# dot1x mac-auth-bypass eap

You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC

Related Commands

interface-id]

Displays IEEE 802.1x status for the specified port.

dot1x mac-auth-bypass

Catalyst 2960 Switch Command Reference

Show Quick Links

Table of Contents