Clear Lacp; Show Lacp - Cisco Catalyst 2960 Command Reference Manual

clear lacp

clear lacp
Use the clear lacp privileged EXEC command to clear Link Aggregation Control Protocol (LACP)
channel-group counters.
Syntax Description
channel-group-number
counters
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(25)FX
Usage Guidelines You can clear all counters by using the clear lacp counters command, or you can clear only the counters
for the specified channel group by using the clear lacp channel-group-number counters command.
Examples This example shows how to clear all channel-group information:
Switch# clear lacp counters
This example shows how to clear LACP traffic counters for group 4:
Switch# clear lacp 4 counters
You can verify that the information was deleted by entering the show lacp counters or the show lacp 4
counters privileged EXEC command.
Related Commands Command

show lacp

Catalyst 2960 Switch Command Reference
2-40
clear lacp {channel-group-number counters | counters}
(Optional) Channel group number. The range is 1 to 6.
Clear traffic counters.
Modification
This command was introduced.
Description
Displays LACP channel-group information.
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
OL-8604-03