Cisco Catalyst 2960 Command Reference Manual page 225

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
Examples This example shows how to create a macro that defines the duplex mode and speed:
Switch(config)# macro name duplex
Enter macro commands one per line. End with the character '@'.
duplex full
speed auto
@
This example shows how create a macro with # macro keywords:
Switch(config)# macro name test
switchport access vlan $VLANID
switchport port-security maximum $MAX
#macro keywords $VLANID $MAX
@
This example shows how to display the mandatory keyword values before you apply the macro to an
interface:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# macro apply test ?
WORD
<cr>
Switch(config-if)# macro apply test $VLANID ?
WORD
Switch(config-if)# macro apply test $VLANID 2
WORD
<cr>
Switch(config-if)# macro apply test $VLANID 2 $MAX ?
WORD
Related Commands Command
macro apply
macro description
macro global
macro global description
show parser macro
OL-8604-03
keyword to replace with a value e.g
Value of first keyword to replace
keyword to replace with a value e.g
Value of second keyword to replace
Description
Applies a macro on an interface or applies and traces a macro on an
interface.
Adds a description about the macros that are applied to an interface.
Applies a macro on a switch or applies and traces a macro on a switch
Adds a description about the macros that are applied to the switch.
Displays the macro definition for all macros or for the specified macro.
$VLANID,$MAX
$VLANID,$MAX
Catalyst 2960 Switch Command Reference
macro name
2-199