Cisco Catalyst 2960 Command Reference Manual page 329

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
<output truncated>
This is an example of output from the show auto qos interface interface-id command when the auto
qos voip cisco-phone interface configuration command is entered:
Switch> show auto qos interface fastethernet0/2
FastEthernet0/2
auto qos voip cisco-softphone
These are examples of output from the show auto qos command when auto-QoS is disabled on the
switch:
Switch> show auto qos
AutoQoS not enabled on any interface
These are examples of output from the show auto qos interface interface-id command when auto-QoS
is disabled on an interface:
Switch> show auto qos interface gigabitethernet0/1
AutoQoS is disabled
Related Commands Command
auto qos voip
debug auto qos
OL-8604-03
Description
Automatically configures QoS for VoIP within a QoS domain.
Enables debugging of the auto-QoS feature.
Catalyst 2960 Switch Command Reference
show auto qos
2-405