Show Mac Address-Table Address - Cisco Catalyst 2960 Command Reference Manual

Chapter 2 Catalyst 3750 Switch Cisco IOS Commands

show mac address-table address

Use the show mac address-table address user EXEC command to display MAC address table
information for the specified MAC address.
Syntax Description
mac-address
interface interface-id
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)FX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mac address-table address command:
Switch# show mac address-table address 0002.4b28.c482
------------------------------------------
Vlan
----
All
Total Mac Addresses for this criterion: 1
OL-8604-03
show mac address-table address mac-address [interface interface-id] [vlan vlan-id] [ | {begin |
exclude | include} expression]
Specify the 48-bit MAC address; the valid format is H.H.H.
(Optional) Display information for a specific interface. Valid interfaces
include physical ports and port channels.
(Optional) Display entries for the specific VLAN only. The range is 1
to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- ----
0002.4b28.c482 STATIC
Ports
-----
CPU
Catalyst 2960 Switch Command Reference
show mac address-table address
2-497