Cisco Catalyst 2960 Command Reference Manual page 197

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
This example shows how to enter emergency location information for an interface:
Switch(config)# int g2/0/2
Switch(config-if)# location elin-location-id 1
Switch(config-if)# end
You can verify your settings by entering the show location elin interface privileged EXEC command.
Related Commands Command
link state group
show location
OL-8604-03
Description
Configures the location information for an endpoint.
Displays the location information for an endpoint.
Catalyst 2960 Switch Command Reference
location (interface configuration)
2-171