Cisco Catalyst 4500 Series Command Reference Manual page 1168

vlan (VLAN Database mode)
Examples This example shows how to add a new VLAN with all the default parameters to the new VLAN database:
Switch(vlan)# vlan 2
If the VLAN already exists, no action occurs.
Note
This example shows how to cause the device to add a new VLAN, specify the media type and parent
VLAN ID number 3, and set all the other parameters to the defaults:
Switch(vlan)# vlan 2 media fastethernet parent 3
VLAN 2 modified:
This example shows how to delete VLAN 2:
Switch(vlan)# no vlan 2
Switch(vlan)#
This example shows how to return the MTU to the default for its type and the translational bridging
VLANs to the default:
Switch(vlan)# no vlan 2 mtu tb-vlan1 tb-vlan2
Switch(vlan)#
Related Commands Command
show vlan
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-1110
Media type FASTETHERNET
Parent VLAN 3
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays VLAN information.
OL-27596 -01