Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Examples
This example shows how to allocate bandwidth on queue 1 to 100 Mbps:
Switch(config-if)# tx-queue 1
Switch(config-if-tx-queue)# bandwidth 1000000000
Switch(config-if-tx-queue)#
This example shows how to configure transmit queue 3 to the high priority:
Switch(config-if)# tx-queue 3
Switch(config-if-tx-queue)# priority high
Switch(config-if-tx-queue)#
This example shows how to configure the traffic shaping rate of 64 kbps to transmit queue 1:
Switch(config-if)# tx-queue 1
Switch(config-if-tx-queue)# shape 64000
Switch(config-if-tx-queue)#
Related Commands
Command
show qos interface
OL-27596 -01
Description
Displays queueing information.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
tx-queue
2-1097