Cisco Catalyst 4500 Series Command Reference Manual page 1222

Index
configure on an interface
PoE policing and monitoring
displaying status
2-899
police (percent) command
police (two rates) command
police command
2-510
policing, configure PoE
policing and monitoring status
displaying PoE 2-899
Policy Based Routing
See PBR
policy maps
creating 2-523
marking
2-620
See also QoS, hierarchical policies
traffic classification
defining the class
defining trust states
port, dual-capable
selecting the connector
Port Aggregation Protocol
See PAgP
port-based authentication
displaying debug messages
displaying statistics and status
enabling 802.1X
2-225
host modes
2-218
manual control of authorization state
periodic re-authentication
enabling
2-228
re-authenticating 802.1X-enabled ports
switch-to-client frame-retransmission number
port channel
accessing
2-289
creating
2-289
displaying information
load distribution method
resetting to defaults
setting
2-525
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
IN-14
2-541
2-515
2-517, 2-519
2-541
2-1092
2-463
2-149
2-679
2-225
2-227
2-872, 2-874
2-525
port-channel standalone-disable command
port control, changing from unidirectional or
bidirectional
port-control value, configuring
port range
executing
port security
debugging ports security
deleting secure or specific addresses
displaying settings for an interface or switch
enabling
filter source IP and MAC addresses
setting action upon security violation
setting the rate limit for bad packets
sticky port
Port Trust Device
displaying
power efficient-ethernet auto command
power inline four-pair forced command
power inline logging global command
power negotiation through LLDP, enabling
power status
displaying inline power
displaying power status
power supply
configuring combined and redundant power on the
Catalyst 4507R
configuring inline power
configuring power consumption
displaying the SEEPROM
setting inline power state
PPPoE Discovery
2-223
enable vendor-tag stripping on packetsPPPoE Server
enable vendor-tag stripping on Discovery
packets
PPPoE Discovery packets, limit rate arriving on an
interfsce 2-560
PPPoE Intermediate Agent
clear statistics (packet counters)
debugging
2-23
2-36
2-290
2-165
2-1054
2-1054
2-905
2-540
2-891
2-891
2-528
2-534
2-528
2-701
2-532
2-562
2-127
2-166
2-527
2-125
2-885
2-352
2-1054
2-1054
2-533
2-538
2-401
OL-27596 -01