Vmps Reconfirm (Global Configuration) - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

vmps reconfirm (global configuration)

To change the reconfirmation interval for the VLAN Query Protocol (VQP) client, use the vmps
reconfirm command. To return to the default setting, use the no form of this command.
Syntax Description
interval
Defaults
The reconfirmation interval is 60 minutes.
Command Modes Global configuration mode
Command History Release
12.1(13)EW
Examples This example shows how to set the VQP client to reconfirm dynamic VLAN entries every 20 minutes:
Switch(config)# vmps reconfirm 20
Switch(config)#
You can verify your setting by entering the show vmps command and examining information in the
Reconfirm Interval row.
Related Commands Command
show vmps
vmps reconfirm (privileged
EXEC)
OL-27596 -01
vmps reconfirm interval
no vmps reconfirm
Queries to the VLAN Membership Policy Server (VMPS) to reconfirm dynamic
VLAN assignments; valid values are from 1 to 120 minutes.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Displays the VLAN Query Protocol (VQP) version,
reconfirmation interval, retry count, VLAN Membership Policy
Server (VMPS) IP addresses, current servers, and primary
servers.
Sends VLAN Query Protocol (VQP) queries to reconfirm all the
dynamic VLAN assignments with the VLAN Membership Policy
Server (VMPS).
vmps reconfirm (global configuration)
2-1123