Cisco Catalyst 4500 Series Command Reference Manual page 360

ip arp inspection validate
Examples This example show how to enable the source MAC validation:
Switch(config)# ip arp inspection validate src-mac
Switch(config)# end
Switch# show ip arp inspection vlan 1
Source Mac Validation
Destination Mac Validation : Disabled
IP Address Validation
Vlan
----
Vlan
----
Switch#
Related Commands Command
arp access-list
show ip arp inspection
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-302
Configuration
-------------
1 Enabled
ACL Logging
-----------
1 Deny
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
: Enabled
: Disabled
Operation ACL Match
--------- ---------
Active
DHCP Logging
------------
Deny
Description
Defines an ARP access list or adds clauses at the end of a
predefined list.
Displays the status of dynamic ARP inspection for a
specific range of VLANs.
Static ACL
----------
OL-27596 -01