Cisco Catalyst 4500 Series Command Reference Manual page 595

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Examples This example shows how to set the Power over Ethernet allocation to use 8000 mW, regardless of any
CDP packet that is received from the powered device:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# power inline consumption default 8000
Switch(config)# end
Switch#
Related Commands Command
power inline
show power
OL-27596 -01
Description
Sets the inline-power state for the inline-power-capable
interfaces.
Displays information about the power status.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
power inline consumption
2-537