Show Macro Auto Device - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show macro auto device

Use the show macro auto device global configuration command to display the default information for
a device, including builtin function name and the parameters that can be provided for the commands
when executing the builtin function.
Syntax Description device_id
Defaults
None
Command Modes
Global configuration
Command History Release
12.2(54)SG
Usage Guidelines
This command displays the default values as well as the currently used values if configured.
Examples
This example shows how to display the default information for the device access-point:
Switch# show macro auto device access-point
Device:access-point
Default Macro:CISCO_AP_AUTO_SMARTPORT
Current Macro:CISCO_AP_AUTO_SMARTPORT
Configurable Parameters:NATIVE_VLAN
Defaults Parameters:NATIVE_VLAN=1
Current Parameters:NATIVE_VLAN=1
Related Commands Command
show macro auto event
manager
show macro auto interface
OL-27596 -01
show macro auto device device_id
Specifies the device ID.
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Description
Refer to the Command Reference in the IOS library
Display Auto SmartPorts status and the functions applied on an
interface.
show macro auto device
2-845