Show Ip Wccp - Cisco Catalyst 4500 Series Command Reference Manual

show ip wccp

show ip wccp
To display the Web Cache Communication Protocol (WCCP) global configuration and statistics, use the
show ip wccp command in user EXEC or privileged EXEC mode.
Syntax Description service-number
interfaces
cef
counts
detail
web-cache
view
detail
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History Release
15.0(2)SG
Usage Guidelines Use the clear ip wccp command to reset the counter for the "Packets Redirected" information.
Use the show ip wccp service-number command to get the "Total Packets S/W Redirected" count. The
"Total Packets S/W Redirected" count is the number of packets redirected in software.
Use the show ip wccp service-number detail command to get the "Packets Redirected" count. The
"Packets Redirected" count is the number of packets redirected in software.
Use the show ip wccp web-cache detail command to get an indication of which traffic is redirected to
which cache engine.
Use the show ip wccp command to show the configured WCCP services and a summary of their current
state.
For cache-engine clusters using Cisco cache engines, the reverse proxy service-number is indicated by
a value of 99.
All the packet statistics correspond to packets switched in software.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-772
show ip wccp [service-number [view | detail] | interfaces [cef | counts | detail] | web-cache]
(Optional) Identification number of the web cache service group being controlled
by the cache. The number can be from 0 to 254. For web caches using Cisco cache
engines, the reverse proxy service is indicated by a value of 99.
(Optional) WCCP redirect interfaces.
(Optional) CEF interface statistics, including the number of input, output, dynamic,
static, and multicast services.
(Optional) WCCP interface count statistics, including the number of CEF and
process-switched output and input packets redirected.
(Optional) WCCP interface configuration statistics, including the number of input,
output, dynamic, static, and multicast services.
(Optional) Statistics for the web cache service.
(Optional) Other members of a particular service group, have or have not been
detected.
(Optional) Information about the router and all web caches.
Modification
This command was introduced on Catalyst 4900M, Catalyst 4948E,
Supervisor Engine 6-E, and Supervisor Engine 6L-E.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-27596 -01