Show Module - Cisco Catalyst 4500 Series Command Reference Manual

show module

show module
To display information about the module, use the show module command.
Syntax Description
mod
all
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.2(25)EW
Usage Guidelines In the Mod Sub-Module fields in the command output, the show module command displays the
supervisor engine number but appends the uplink daughter card's module type and information.
If the PoE consumed by the module is more than 50 W above the administratively allocated PoE, the
"Status" displays as "PwrOver." If the PoE consumed by the module is more than 50 W above the PoE
module limit, the "Status" displays as "PwrFault."
Examples This example shows how to display information for all the modules.
This example shows the show module command output for a system with inadequate power for all
installed modules. The system does not have enough power for Module 5; the "Status" displays it as
"PwrDeny."
Switch# show module all
Mod
----+-----+--------------------------------------+-----------------+-----------
1
2
3
5
6
M MAC addresses
--+--------------------------------+---+------------+----------------+---------
1 005c.9d1a.f9d0 to 005c.9d1a.f9df 0.5 12.1(11br)EW 12.1(20020313:00 Ok
2 0010.7bab.9920 to 0010.7bab.9925 0.2
3 0050.7356.2b36 to 0050.7356.2b47 1.0
5 0001.64fe.a930 to 0001.64fe.a95f 0.0
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-854
show module [mod | all]
(Optional) Number of the module; valid values vary from chassis to chassis.
(Optional) Displays information for all modules.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Enhanced the output of the show idprom interface command to include the
10-Gigabit Ethernet interface.
Ports Card Type
2 1000BaseX (GBIC) Supervisor(active)
6 1000BaseX (GBIC)
18 1000BaseX (GBIC)
0 Not enough power for module
48 10/100BaseTX (RJ45)
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Model
WS-X4014
WS-X4306
WS-X4418
WS-X4148-FX-MT
WS-X4148
Hw Fw Sw
Serial No.
JAB054109GH
00000110
JAB025104WK
00000000000
JAB023402RP
Status
Ok
Ok
PwrDeny
OL-27596 -01