Subscribe-To-Alert-Group Inventory - Cisco Catalyst 4500 Series Command Reference Manual

subscribe-to-alert-group inventory

subscribe-to-alert-group inventory
To subscribe a destination profile to the Inventory alert group, use the
subscribe-to-alert-group inventory command.
Syntax Description periodic
daily hh:mm
monthly date hh:mm
weekly day hh:mm
Defaults This command has no default settings.
Command Modes cfg-call-home-profile
Command History Release
12.2(52)SG
Usage Guidelines To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
The Inventory alert group can be configured for periodic notification.
Examples This example shows how to configure the Inventory alert group with periodic daily alert at 21:12":
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# subscribe-to-alert-group inventory periodic daily 21:12
Related Commands Command
destination address
destination message-size-limit bytes
destination preferred-msg-format
destination transport-method
profile
subscribe-to-alert-group all
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-1032
subscribe-to-alert-group inventory [periodic {daily hh:mm | monthly date hh:mm |
weekly day hh:mm}]
(Optional) Specifies a periodic call-home message.
Sets a daily alert in hours and minutes.
Sets a monthly alert in day, hour, and minute.
Sets a weekly alert in day, hour, and minutes.
Modification
Support was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Configures the destination e-mail address or URL to which
Call Home messages will be sent.
Configures a maximum destination message size for the
destination profile.
Configures a preferred message format.
Enables the message transport method.
Enters profile call-home configuration submode
Subscribes to all available alert groups.
OL-27596 -01