Power Inline Police - Cisco Catalyst 4500 Series Command Reference Manual

Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches

power inline police

To configure Power over Ethernet policing on a particular interface, use the power inline police
command. The no form of the command disables PoE policing on an interface.
Syntax Description
action
errdisable
log
Defaults
PoE policing is disabled.
Command Modes
Interface configuration mode
Command History
Release
12.2(50)SG
Usage Guidelines
If a port is in the errdisable state because of a PoE policing fault, enter the shut command followed by
a no shut on the interface to make the port operational again.
You can also configure inline-power errdisable autorecovery so that an errdisabled interface is
automatically revived when the errdisable autorecovery timer expires.
Examples
This example shows how to enable PoE policing and configure a policing action:
Switch(config)# int gigabitEthernet 2/1
Switch(config-if)# power inline police
Switch(config-if)# do show power inline police gigabitEthernet 2/1
Available:421(w)
Interface Admin
--------- ------ ---------- ---------- ---------- ------ -----
Gi2/1
Switch(config-if)# power inline police action log
Available:421(w)
OL-27596 -01
power inline police [action] [errdisable | log]
no power inline police [action] [errdisable | log]
(Optional) Specifies the action to take on the port when a PoE policing fault
occurs (the device consumes more power than it's allocated).
(Optional) Enables PoE policing on the interface and places the port in an
errdisable state when a PoE policing fault occurs.
(Optional) Enables PoE policing on the interface and, if a PoE policing fault
occurs, shuts, restarts the port, and logs an error message.
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Used:39(w)
Oper
State
State
auto
on
Used:39(w)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Remaining:382(w)
Admin
Oper
Cutoff Oper
Police
Police
Power
errdisable ok
17.4
Remaining:382(w)
power inline police
Power
7.6
2-541

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents