Setting Channel Levels - Yamaha O1V96 Owner's Manual

Parameter
DAW SHIFT/ADD
DAW OPTION/ALL
DAW CTRL/CLUCH
DAW ALT/FINE
DAW BANK +
DAW BANK –
DAW Channel +
DAW Channel –
DAW REC/RDY 1
DAW REC/RDY 2
DAW REC/RDY 3
DAW REC/RDY 4
DAW REC/RDY 5
DAW REC/RDY 6
DAW REC/RDY 7
DAW REC/RDY 8
DAW REC/RDY 9
DAW REC/RDY 10
DAW REC/RDY 11
DAW REC/RDY 12
DAW REC/RDY 13
DAW REC/RDY 14
DAW REC/RDY 15
DAW REC/RDY 16
DAW REC/RDY ALL
Selecting Channels
To select a single Pro Tools channel, press the [SEL] button that corresponds to the desired
channel.
To select multiple Pro Tools channels simultaneously, while holding down one [SEL] but-
ton, press the [SEL] buttons of the other channels you wish to add. Press the [SEL] buttons
again to cancel the selection.

Setting Channel Levels

1 Make sure that the FADER MODE [HOME] button indicator is lit steadily.
If the indicator is flashing, press the [HOME] button to turn on the button indicator.
2 Operate the faders to set channel levels.
Press and hold down the [AUX 6] button and press the desired [SEL] button to reset the
corresponding channel fader level.
Functions in the same way as Macintosh keyboard keys (Shift, Option, Con-
trol, and Alt). Pressing one of the buttons (to which these functions are
assigned) along with another button enables you to execute various com-
mands.
Executes the Bank Swap operation. Pressing the button (to which this function
is assigned) switches the entire 16-channel bank.
Executes the Channel Scroll operation. Pressing the buttons (to which these
functions are assigned) enables you to scroll channels horizontally.
Pressing the buttons (to which these functions are assigned) places the corre-
sponding channel strips in Record Ready mode. At this time, the indicator of
the button you pressed flashes. It lights up when recording starts.
If no channel strips are in Record Enabled mode, pressing the button (to
which this function is assigned) places all channel strips in Record Enabled
mode. The button indicator flashes if any channel strip in any bank is in
Record Enabled mode. Pressing the button while the button indicator is flash-
ing cancels Record Enabled mode for all channel strips.
Pro Tools Remote Layer
Function
01V96 Version 2—Owner's Manual
199
17