Yamaha O1V96 Owner's Manual page 36

36
Chapter 3—Operating Basics
- Stereo page
This page displays the Stereo Out output level.
If you selected the CH1-32 page or the Master page, use the MASTER MODE parameter to
select one of the following three metering signal types:
• GATE GR....................... The amount of gain reduction for the gate (only for CH1-32)
• COMP GR..................... The amount of gain reduction for the compressor
• LEVEL ........................... Input Channel input level, or Output Channel output level
Tip: These pages also allow you to change the metering position using the POSITION param-
eter. This parameter setting operates in unison with the Meter | Position page setting.
4 To activate the Peak Hold function, move the cursor to the PEAK HOLD but-
ton, then press [ENTER].
The PEAK HOLD button turns on, and the peak level is held on the meters on the page. To
cancel the Peak Hold function, turn the PEAK HOLD button off.
01V96 Version 2—Owner's Manual