Panning Aux Sends - Yamaha O1V96 Owner's Manual

Panning Aux Sends

You can pair adjacent odd-even (in this order) Aux Sends for stereo operation. This enables
you to pan signals from Input Channels to paired Aux Sends.
1 Pair the desired two Aux Sends. (See page 105 for more information on pair-
ing channels.)
2 Use the FADER MODE [AUX 1]–[AUX 8] buttons to select one of the paired
Aux Sends.
3 Repeatedly press the button you pressed in Step 2 to display the Aux | Pan
page.
2
1
A
Aux pan controls
These controls adjust the pan setting of signals routed from Input Channels to paired
Aux buses.
B
MODE
The MODE parameter determines how paired Input Channels are panned.
C
INPUT PAN LINK
When this parameter is turned on, Aux Sends follow the Input Channel Pan.
4 Move the cursor to the Aux pan control of the desired Input Channel, the
rotate the Parameter wheel to set the pan value.
5 If necessary, move the cursor to the MODE parameter box, then rotate the
Parameter wheel to select INDIVIDUAL, GANG, or INV GANG, then press
[ENTER].
If the INPUT PAN LINK ON/OFF button is turned off, this Mode setting is independent of
the Mode parameter on the Pan page. (See page 85 for more information on Mode
options.)
6 To link the Input Channel Pan setting with the Aux Send Pan setting, move
the cursor to the INPUT PAN LINK ON/OFF button, then press [ENTER].
The pan positions on the Pan page are copied to the Aux pan setting, and the pan controls
on both pages are linked.
Tip:
• If paired Aux Sends are in Variable mode, the Aux Send levels, Aux On/Off, and Pre/Post
parameters for paired Input Channels are linked to each other.
• If paired Aux Sends are in Fixed mode, the Aux On/Off parameters for paired Input Chan-
nels are not linked to each other.
119
Panning Aux Sends
3
01V96 Version 2—Owner's Manual
9