Yamaha O1V96 Owner's Manual page 122

122
Chapter 10—Input & Output Patching
Input Patching
Follow the steps below to change the Input Patch.
1 Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch | In
Patch page appears.
Inputs, ADAT IN channels, and slot channels that are currently assigned to Input Channels
are shown in the parameter boxes (
tors are explained below:
Parameter value
–
AD1–AD16
ADAT1–ADAT8
SL-01–SL-16
FX1-1 & FX1-2
FX2-1 & FX2-2
FX3-1 & FX3-2
FX4-1 & FX4-2
2TD-L & 2TD-R
2 Move the cursor to an input patch parameter you wish to change, then
rotate the Parameter wheel or press the [INC]/[DEC] buttons to modify the
patching.
The long name of the currently-selected channel is
indicated in the upper-right corner of the screen (
Below the channel name is the long name of the
selected input channel (
information on changing channel names.)
3 Press [ENTER] to confirm the change.
Tip:
• You can patch an input signal to multiple Input Channels.
• You can store the Input Patch settings to the Input Patch library. Refer to Chapter 16 for more
information.
01V96 Version 2—Owner's Manual
1
1
) below the channel numbers. The parameter indica-
No assignment
INPUT connectors 1–16
ADAT IN Input Channels 1–8
Slot Channels 1–16
Outputs 1 & 2 of Internal Effects Processor 1
Outputs 1 & 2 of Internal Effects Processor 2
Outputs 1 & 2 of Internal Effects Processor 3
Outputs 1 & 2 of Internal Effects Processor 4
2TR DIGITAL IN (L/R)
2
). (See page 94 and 229 for
Description
1
).
1
2