Yamaha O1V96 Owner's Manual page 198

198
Chapter 17—Remote Control
Parameter
DAW PRE
DAW IN
DAW OUT
DAW POST
DAW RTZ
DAW END
DAW ONLINE
DAW LOOP
DAW QUICKPUNCH
DAW AUTO FADER
DAW AUTO MUTE
DAW AUTO PAN
DAW AUTO SEND
DAW AUTO PLUGIN
DAW AUTO SENDMUTE
DAW AUTO READ
DAW AUTO TOUCH
DAW AUTO LATCH
DAW AUTO WRITE
DAW AUTO TRIM
DAW AUTO OFF
DAW AUTO SUSPEND
DAW AUTO STATUS
DAW GROUP STATUS
DAW MONI STATUS
DAW CREATE GROUP
DAW SUSPEND GROUP
DAW WIN TRANSPORT
DAW WIN INSERT
DAW WIN MIX/EDIT
DAW WIN MEM-LOC
DAW WIN STATUS
DAW UNDO
DAW SAVE
DAW EDIT MODE
DAW EDIT TOOL
01V96 Version 2—Owner's Manual
Plays back from the pre-roll point up to the beginning of the selected area.
Plays back from the beginning of the selected area for a duration specified as
the pre-roll.
Plays back to the end of the selected area for a duration specified as the
post-roll.
Plays back from the end of the selected area for a duration specified as the
post-roll.
Moves the playback cursor to the beginning of the session.
Moves the playback cursor to the end of the session.
Toggles between on-line and off-line.
Toggles Loop Playback on and off.
Toggles QuickPunch on and off.
Correspond to the Automation Overwrite (Auto Enable) functions.
Select Automation modes.
Cancels Automation recording and playback for all channels. When Automa-
tion is interrupted, the LED flashes, and channel strip controls maintain the
current settings.
Displays the channel Automation mode (Read, Tch, Ltch, Wrt, or Off). The
mode setting appears at the bottom of each channel on a Channel or Meter
Display page when you press and hold the button to which this function is
assigned.
Displays a Group ID (to which each channel belongs) below each channel
number on a Channel or Meter Display page (in all caps for a main group and
in lowercase letters for a sub-group).
Pressing the key (to which this function is assigned) enables you to view the
current monitoring mode and the channel strip type.
Pressing the key (to which this function is assigned) enables you to execute
the function specified in the menu of the Pro Tools Group list.
Suspends all mix groups temporarily. Press the button again to undo suspen-
sion.
Shows or hides the Transport window.
Shows or hides the Insert window.
Toggles between the Mix window and Edit window. (Both windows are not
displayed at the same time.)
Shows or hides the Memory Locations window.
Shows or hides the Status window.
Executes the Edit menu's Undo/Redo command.
Executes the Edit menu's Save command.
Pressing the button (to which this function is assigned) repeatedly selects
Shuffle, Slip, Spot, or Grid edit mode in this order.
Pressing the button (to which this function is assigned) repeatedly selects one
of seven edit tools (Zoomer, Trimmer, Selector, Grabber, Smart Tool, Scrubber,
and Pencil, in this order).
Function